Product Description
CIPA 93443 EVO Formance Alfas Maximum Intensity H4 Ultra White Halogen Bulbs - Twin Pack: Automotive. Simply remove your existing bulb and install the Alfas bulb. EVO Formance Alfas Maximum Intensity replacement bulbs are the best approximation to a full HID lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Ultra-White inch color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas' wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle's existing components. Don't Change… Evolve Why Choose Alfas? Choose Alfas if you want MAXIMUM illumination and an Ultra-White inch Color without the complications of installing an HID System. When it comes to color, brightness, longevity, safety, convenience, affordability, and customization options - Alfas Maximum Intensity's are unsurpassed. New technology = More light, less power, and a safer installation. Color The Ultra-White inch color of the Alfas Maximum Intensity line have been fine-tuned by experimenting with different combinations of gases, bulb finishes and specialized filaments. Alfas emit a pure white light that is rated at 5500K. They were designed to blend perfectly with the white color produced by the HID systems found in the high-end luxury vehicles and are the best approximation to a full HID lighting system. Brightness OE/Factory bulbs vs. Alfas bulbs Alfas Maximum Intensity bulbs offer brightness levels that will exceed the vehicle's factory installed OEM halogen bulbs. This brightness level is achieved by using a high quality tungsten filament from Japan that safely emits upwards of 120 watts of light. Alfas bulbs also have a transparent top. By removing the paint at the top of the bulb 10% more light is emitted. Alfas are also manufactured using quartz glass. Quartz is more transparent than normal glass. This results in even more light emission from the bulbs. The Alfas wiring harness uses heat resistant 14 Gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfa bulb. The result is even more of an increase in brightness. Standard OE bulbs output about 1000 lumens of light, whereas the Alfas Maximum Intensity's are capable of outputting upwards of 2300 lumens. Longevity Alfas Maximum Intensity bulbs have a life expectancy of around 800 hours. 800 hours of bulb use exceeds any aftermarket high performance bulb on the market and is comparable to the life expectancy of stock bulbs. This long life expectancy is achieved by limiting power consumption and therefore controlling the heat of [4927] EVO Formance H4 Alfas Maximum Intensity replacement bulbs are the best approximation to a full HID Xenon lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and Ultra White color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Finland. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas’ wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Experience plug and play brightness that will not melt or damage your vehicle’s existing components.
Shipping Weight: 8.8 ounces
|
(
) 
