Product Description
Pennzoil Platinum Full Synthetic 5W20 Motor Oil -1 Quart, Pack of 6: Automotive. A numerical code system, established by the Society of Automotive Engineers (SAE), grades motor oils according to viscosity characteristics. Pennzoil Platinum synthetic 5W-20 motor oil is a multigrade weight (viscosity grade) oil for use in gasoline engines in a variety of SUVs, light vans and trucks, and passenger cars in severe or high-temperature conditions. The synthetic formula helps prevent sludge build-up, provides more overall lubrication and wear protection, and increases gas mileage in comparison to conventional oils. 5W-20 weight is designed for both winter and summer temperatures and is distributed throughout the engine to ensure proper lubrication for the moving parts. It is thinner at colder temperatures than 5W-30 and 10W-30 grade oils. Synthetic oils provide thermal and oxidation stability for better performance between the recommend oil change intervals than what conventional oils offer. Pennzoil Platinum 5W-20 synthetic oil meets internationally recognized standards and measures for quality assurance. The recommended oil for an engine is identified in the vehicle’s owner or service manual under specified operating conditions. Properties Test Value Gravity, degrees API (ASTM D287) 34.38 Specific gravity @ 60 degrees F (15.6 degrees C) (ASTM D287) 0.852 Viscosity, @ 40 degrees C/104 degrees F, cSt (ASTM D445) 46.84 Viscosity @ 100 degrees C/212 degrees F, cSt (ASTM D445) 8.48 Viscosity Index (ASTM D2270) 160 Flash Point (ASTM D93) 224 degrees C/435.2 degrees F Pour Point (ASTM D97) -45 degrees C/-49 degrees F MRV Viscosity, cP (degrees C/F) (ASTM D4684) 9,700 cP (-35 degrees C/-31 degrees F) CCS Viscosity, cP (degrees C/F) (ASTM D5293) 4,250 cP (-35 degrees C/-31 degrees F) HT/HS Viscosity, cP @ 150 degrees C/302 degrees F (ASTM D4683) 2.6 Noack Volatility, % 13.2 Pennzoil Platinum 5W-20 synthetic oil meets or exceeds the standards and measures of American Petroleum Institute (API) SN and all previous categories; International Lubricants Standardization and Approval Committee (ILSAC) GF-5; and European Automobile Manufacturer’s Association (ACEA) A1-02. Pennzoil Platinum 5W-20 also meets the following quality levels: General Motors (GM) 6094M, Ford WSS M2C945-A, and Chrysler MS-6395. These ensure uniform oil products at a given level or standard across the world and the marketplace in general. Motor oil is made from crude oil and is used to lubricate, clean, and cool engines. Types of motor oil include synthetic, conventional, diesel, heavy-duty, racing, motorcycle, bio-based, and blends of conventional and synthetic. The types vary by additives or chemicals mixed into the base product and the refinement process itself, and these factors determine the cost, performance, and operating usage. In general, synthetic oils have higher overall performance than conventional oils for common automotive usage. Oils also differ by grade of viscosity (weight), which rates the oil performance characteristics under operating conditions. From low (thinner, easier to flow) to high (thicker, harder to flow) viscosity, the numbers range from 0 to 60 and can have a “W inch suffix, which designates “winter inch or cold-start viscosity at cold temperatures.
Shipping Weight: 11.8 pounds
|
(
) 
