Product Description
ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges: Automotive. It can be moved from car to car. The ScanGaugeII is a 3-in-1 automotive computer that combines a multifunction trip computer, diagnostic scan tool, and up to 37 digital gauges in one small package. It connects easily to your vehicle's On-Board Diagnostic (OBDII) port and communicates directly with the vehicle's computer. Not sure if your car uses OBDII or Controller Area Network (CAN)? The unit will automatically determine which system to use and switch to it. The ScanGaugeII works on all 1996 or newer OBDII cars, including gas, diesel, propane and hybrid vehicles, as well as vehicles with the latest CAN systems. A detachable cable allows for easy transfer between multiple vehicles. Its menu-driven operation means there's no need to memorize complex sequences, and no tools are required for installation. Expandable Add-A-Gauge Technology The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka XGauge) technology. Add to the original 12 gauges by customizing the ScanGaugeII to monitor up to 25 more--depending on your specific vehicle's sensor design. Four gauges can be displayed simultaneously and can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data. ScanGaugeII mounts easily to your dash. Gauges include: Horsepower Fuel Consumption Rate to 1/100th per gallon/liter Vehicle speed (MPH) Fuel Economy Cost Per Mile/Cost Per Trip Manifold Pressure (not available on some vehicles) Battery Voltage Engine Load Coolant Temperature Throttle Position Intake Air Temperature Ignition Timing Engine Speed (RPM) O2 Sensor Data Fuel Trim Hybrid Battery Charge (for Toyota Prius and Ford Escape) And many more, depending on your vehicle's sensor design ScanGaugeII makes diagnostics easy. View Larger Scan Tool The ScanGaugeII includes a diagnostic scan tool that can check for Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the Check Engine inch light on 99% of 1996 and newer vehicles. (However, this feature may not work on some trouble codes in Dodge vehicles.) If any DTCs are found, the ScanGauge will show how many there are as well as the codes themselves. Then you can use the Internet or repair manual to find out which is the failed part is, so you can repair it yourself or know what needs to be fixed at the mechanic's shop. Multifunction Trip Computer Four sets of data are automatically recorded on the trip computer: Current, Today, Previous Day, and Tank Trip. The current inch trip restarts after the engine has been off for more than 3 minutes. The today inch trip restarts after the vehicle has not moved for 9 hours, and the data from today inch is moved to previous day inch when you restart the car, so you don't have to reset the computer every time you begin a trip. Tank trip inch resets when you fill up the tank. It can provide you with to empty inch data and oth[5996] The ScanGaugeII is a compact vehicle computer that connects to the diagnostic connector in seconds and gives you an extensive trip computer, real time gauges and trouble code reader. It can read fuel economy as you drive, tell you how fast your friend drove your car last night, tell you when you are going to run out of fuel and dozens of other functions. Installation takes only seconds and requires no tools. Works on gas, diesel, propane, and hybrid vehicles.
Shipping Weight: 12 ounces
|
(
) 
